3Pole+N , 65 KA , 230V , Schneider, Surge Arrester
- This Acti9 iPRD65r surge arrester protects 3P+N installations.
- It allows quick replacement of damaged cartridges.
- This Type 2 device is recommended for very high risk level and incoming panel board.
- It offers remote reporting of the "cartridge must be changed" message.
- It can be turned over to allow the phase/neutral/earth cables to enter through either the top or the bottom.
- The associated circuit breaker Isc breaking capacity can go up to 50kA.
- It is compatible with TT and TN-S earthing system.
- The Imax rated discharge current is 65kA.
- The In nominal discharge current is 20kA.
- The Uc maximum continuous operating voltage in common mode is 260VAC between neutral and earth, and 350VAC between phase and earth.
- The Uc maximum continuous operating voltage in differential mode (between phase and neutral) is 350VAC.
- The Up Voltage protection level is 1.5kV in common mode (N/PE) and in differential mode (L/N).
- The Un rated service voltage is 230VAC or 400VAC.
- The operating frequency is 50Hz or 60Hz.
- The dimensions are (W) 72mm x (H) 85mm x (D) 69mm.
- The width in 9mm pitches is 8.
- The weight is 450g.
- The degree of protection is IP20 and IP40 in modular enclosure.
- The operating temperature is -25°C to 60°C.
- The storage temperature is -40°C to 85°C.
- This product complies with IEC 61643-11:2011 and EN61643-11:2012 standards.